| |
- DIMENSION
- SPECIFICATIONS
- APPLICATIONS
DIMENSION
SPECIFICATIONS
| MODEL |
LS 1000x900 |
L1000x1400 |
| SWING OVER BED |
1,220 mm |
| SWING OVER CROSS SLIDE |
750 mm |
| SWING OVER COVER |
1000 mm |
| CENTER HEIGHT |
650 mm |
| WIDTH OF CARRIAGE |
945 mm |
| WIDTH OF CROSS SLIDE |
400 mm |
| Z-AXIS TRAVERSE |
900mm / 1,400mm |
| CONTROL |
STD. |
FANUC 0iTC |
| OPT. |
SIEMENTS 802D solution line |
| WIDTH OF BED |
610mm |
| BED WAY |
2-V-way |
| MACHINE LENGTH |
6,400mm / 6,900mm |
| HEADSTOCK : |
|
|
| SPINDLE BORE |
Ø153mm(6") |
Ø230mm(9") |
Ø305mm(12") |
Ø405mm(16") |
Ø505mm(20") |
| SPINDLE NOSE |
A2-11 |
A2-15 |
A2-20 |
A2-28 |
A2-28 |
| SPINDLE SPEED |
9~600rpm |
9~500rpm |
7~400rpm |
6~300rpm |
6~200rpm |
| SPINDLE CENTER |
MT#6 |
| SPINDLE POWER |
22/26KW (FANUC αi)(STD) ; 30/37KW (OPT) |
| TURRET : |
|
|
| TURRET MODE |
STD. |
H6-450 servo turret |
| OPT. |
H8-450 servo turret |
| TOOL SIZE |
40 mm |
| TAILSTOCK |
Without |
| FEED : |
|
|
| X-AXIS RAPID TRAVERSE |
6M/min |
| X-AXIS BALLSCREW DIAMETER |
Ø40*P5 |
| X-AXIS FEED RANGE |
0.1mm/min~300mm/min |
| X-AXIS TRAVERSE |
650 mm |
| X-AXIS SERVO MOTOR |
3KW (FANUC αi) |
| Z-AXIS RAPID TRAVERSE |
6M/min |
| Z-AXIS BALLSCREW DIAMETER |
Ø63mm*p10 (In center of bed ways) |
| Z-AXIS FEED RANGE |
0.1mm/min~300mm/min |
| Z-AXIS TRANSMITTING |
1:4 Precision gear reducer |
| Z-AXIS SERVO MOTOR |
4KW (FANUC αi) |
| STANDARD ACCESSORIES : |
|
|
| LUBRICATION PUMP |
25 W |
| COOLANT PUMP |
1/2HP (STD) / 15 Bar high pressure (OPT) |
| HYDRAULIC PUMP |
2HP |
| CHIP REMOVING |
STD. |
FRONT CHIP CONVEYOR + REAR CHIP CONVEYOR |
| GUARD |
STD. |
REAR SPLASH GUARD + FRONT 2 DOORS |
| OPT. |
FULLY ENCLOSED GUARDING |
NOTE :
(1) X and Z axes cutting diameter will charge will change when equipped with different turrets.
(2) Spindle speed will change according to different motors.
(3) CE is available for option.
(4) Specification subject to change without prior notice. |
|
|
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
加為好友
